Intelligent Dash Cam Hardwire Kit with Voltage Display
Intelligent Dash Cam Hardwire Kit with Voltage Display for Your Dash Camera, Radar Detector and GPS Power Supply
- It supplies your dash camera with constant power when your vehicle is turned off.
- When the voltage of your vehicle battery drops to the set voltage, the power will be cut-off automatically to prevent your battery from draining.
1 - Dash Camera

2 - Hardwire Kit

3 - Fuse Box

See How Our Smart Hardwire Kit Works!
A new generation hardwire kit with voltage display!
Protect Your Car Battery from draining!
When your car is on, the hard wire kit is running automatically. You are free to set up cut-off voltage and cut-off time.
When your car engine is off, the dashcam is in parking mode and the blue light twinkles. It helps you to monitor the voltage in real-time even when you are away.
With our smart design, when you lift and close the window or open the tailgate, the power will not be cut off immediately, but in 6 minutes!
Battery protection all the time with Mulberry Smart Hardwire Kit!
Dash Cam Hardwire Kit Key Features

Universal for 12V - 48V Vehicle Batteries
Our intelligent dash camera hardwire kit is suitable for most of the vehicles, like cars, buses, trucks, trailers, emergency vans, etc.

Patent Design with LED Display on the Front
You are able to see and set up the power cut-off voltage and time with the two buttons on the hardwire kit whenever you want. And one more LED indicator for advertising your private brand.

Power Not Be Cut-off Immediately But After 6 Minutes
When ACC is off, if the current voltage continues to drop lower than the voltage setting within 6 minutes, the power will be cut-off. This is to prevent the use of electric lifting windows, tailgates and electric sliding door when the car is not in drive, the battery voltage is pulled down and the low voltage enters into protection mode in advance to protect the battery from draining.

Safety Circuit Protection
Our dash cam hardwire kit protects your car battery from short circuit, over current, over temperature and reverse connection.
Dash Cam Hardwire Kit Installation Instructions
Dash Cam Hardwire Kit Connect with
5V Mini USB or Micro USB

- Output Connector: Mini USB or Micro USB
- Output Voltage: 5V
- Input Voltage: 12V – 48V
- Low Voltage Cut-off Setting: 11.~12.2V or 23.2~24.4V
- Cut-off Time Setting: 2, 4, 8, 12, 24, 36, HHH (always on)
Dash Cam Hardwire Kit Connect with
12V Cigarette Lighter Adaptor

- Output Connector: Cigarette Lighter Adapter
- Output Voltage: 12V
- Input Voltage: 12V – 48V
- Low Voltage Cut-off Setting: 11.~12.2V or 23.2~24.4V
- Cut-off Time Setting: 2, 4, 8, 12, 24, 36, HHH (always on)
Dash Cam Hardwire Kit Packaging Options

Hardwire Kit with Color Box

Hardwire Kit with Plastic Box

Hardwire Kit with Poly Bag
